grossbritannien en Products Heat pumps Air-source DHW cylinders

DHW cylinders

Weishaupt DHW cylinders are ideal for use with Weishaupt heat pumps.

Description

Thermal store, version H (buffer tank) Thermal store, version S (for solar energy) Thermal store, version W (without solar connections) Fully equipped WES thermal store

Weishaupt DHW cylinders are ideal for use with Weishaupt heat pumps. Whether for DHW heating via a typical heating system, a solar energy system, or via the drawing together of various heat sources, you will always find just the right one.

Brochures

Energiespeicher WES-A 660, WES-A 910
Energiespeicher WES-A 660, WES-A 910
PDF • 3.7 MB

Operating instructions

WAS - Montage- und Betriebsanleitung
WAS - Montage- und Betriebsanleitung
PDF • 775.1 KB
WASol - Montage- und Betriebsanleitung
WASol - Montage- und Betriebsanleitung
PDF • 801.1 KB
WES-A Ausführung C
WES-A Ausführung C
PDF • 1.5 MB
WES-A Ausführung S
WES-A Ausführung S
PDF • 896.6 KB
WES-A Ausführung W
WES-A Ausführung W
PDF • 1.2 MB
WES-A Ausführung H
WES-A Ausführung H
PDF • 531.9 KB
WAC - Montage- und Betriebsanleitung
WAC - Montage- und Betriebsanleitung
PDF • 771.9 KB
WKT - Montage- und Betriebsanleitung
WKT - Montage- und Betriebsanleitung
PDF • 1.7 MB
WES 200-500 - Montage- und Betriebsanleitung
WES 200-500 - Montage- und Betriebsanleitung
PDF • 440.6 KB

DHW cylinders

Weishaupt Combi Store: WKS

The Combi Store brings together within a single compact housing all of the components needed to integrate heat pumps with a heating system, thereby considerably reducing the amount of installation work required. It contains a 300-litre DHW cylinder, a 100-litre buffer tank, hydraulic components, circulation pumps, and electrical auxiliary heating. The Combi Store is designed for use with a large number of the Weishaupt heat pumps.

WKS

Weishaupt thermal store: WES-A 660/910, version C

Weishaupt thermal stores organise and distribute the heat produced by different energy sources (gas or oil-fired condensing boilers, heat pumps, solar collectors, solid-fuel boilers, or stoves) with an exemplary degree of efficiency. Inlet dampers ensure that the ideal temperature stratification is always maintained within the thermal store. Energy is also drawn off in an economical manner, with solar energy having priority over any other source.

WES 660 A-C

Weishaupt thermal store: WES 200-500 and WES 660/910, versions S and H

A simplified version of the thermal store for heat pumps without solar heating support. It has connections to the heating system (heating unit or heat pump) and additionally to a solid-fuel boiler, fireplace, or stove.

Version S additionally offers solar DHW heating.

WES H

Weishaupt thermal store: WES 100 - 140
This thermal store is designed as an under-set unit and serves as a buffer tank for heat pump systems, evenly releasing heat to a building's heat distribution system.

WES eckig

Weishaupt Aqua Comfort: WAC 300 - 500

A classical water cylinder with a generously dimensioned heating coil for maximum DHW convenience. The large cylinder volume facilitates comfortable hot water temperatures and helps to save energy.

WAC

error while rendering weishaupt.teasers