grossbritannien en Products Heating systems Oil-fired heating systems Weishaupt Thermo Condens oil-fired condensing boiler (WTC-OB, 16 to 45 kW)

Weishaupt Thermo Condens oil-fired condensing boiler (WTC-OB, 16 to 45 kW)

The floor-standing Weishaupt Thermo Condens oil-fired condensing boiler is an ideal, energy-efficient solution when renovating existing oil-fired heating systems.

Description

The oil-fired condensing boiler has many applications Cut-away drawing of the boiler

Oil-fired condensing boilers are particularly economical and environmentally friendly. Weishaupt condensing boilers convert fuel into heat in a very efficient manner; compared to low-temperature systems with a nett efficiency of around 95 %, Weishaupt's oil-fired condensing boilers are 105 % efficient.

Ideal for renovations: The Weishaupt Thermo Condens oil-fired condensing boiler is an ideal, energy-efficient solution when renovating existing oil-fired heating systems. The WTC-OB is suitable for use with light fuel oil EL (with optional neutralisation equipment) and low-sulphur fuel oil EL DIN 51603-1, light fuel oil EL/bio-oil blends (up to 10 % bio-oil) per DIN 51603-6, and light fuel oil EL A Bio 5 and 10.  

Multiple applications: WTC-OB condensing boilers are equipped with two-stage purflam® blue burners, and there are five rated outputs from 16 to 45 kW. Numerous accessories make connection to the existing hydraulic system simple. The condensing boilers are suitable both for installation in new builds and for the renovation of existing heating systems.

Quiet operation: The boiler is equiiped as standard with a combined flue-gas and air-inlet silencer which minimises operational noise.

Saves electricity: The boiler uses only 4 W of electricity on standby. The boiler is also equipped with an energy-saving pump which makes a considerable energy saving in comparison with more typical pumps.

Easy to operate: The Weishaupt Thermo Condens is set and controlled using a portable controller, either directly at the boiler or from elsewhere in the building. Remote operation and maintenance (e.g. via the internet) can be achieved using the optional Weishaupt WCM-COM communications module.

Long service life: The aluminium/silicon heat exchanger is corrosion-resistant and has excellent heat transfer properties, contributing greatly to the energy-efficient operation of the boiler.

Brochures

WTC-OB 20, 25, 30, 35 und 45 kW - Sparsam und zuverlässig
WTC-OB 20, 25, 30, 35 und 45 kW - Sparsam und zuverlässig
PDF • 2.6 MB

Operating instructions

WCM-FS 2.0 manual
WCM-FS 2.0 manual
PDF • 750.4 KB
WTC-OB 20 bis 35 - Montage- und Betriebsanleitung
WTC-OB 20 bis 35 - Montage- und Betriebsanleitung
PDF • 8.2 MB
WAB 155 - Montage- und Betriebsanleitung
WAB 155 - Montage- und Betriebsanleitung
PDF • 574.9 KB

DHW cylinders

Weishaupt Aqua Standard: WAS 150 - 500

This DHW cylinder is available in five sizes, so that precisely the right capacity can be selected for any application. The generously dimensioned heating coil enables rapid heating, and the cylinder's PU-foam insulation keeps the temperature level constant for long periods, saving energy.

WAS 200

Weishaupt Aqua Tower: WAT 140

The slim Weishaupt Aqua Tower can help when boiler room space is limited. Its 140-litre volume and high-capacity heat exchanger make it perfectly adequate for two to four-person households. Nor should the design aspect be overlooked - the Aqua Tower is an elegant solution with any Weishaupt boiler or heating system.

WAT 140

Weishaupt thermal store: WES-A 660/910, version C

Weishaupt thermal stores organise and distribute the heat produced by different energy sources (gas or oil-fired condensing boilers, heat pumps, solar collectors, solid-fuel boilers, or stoves) with an exemplary degree of efficiency. Inlet dampers ensure that the ideal temperature stratification is always maintained within the thermal store. Energy is also drawn off in an economical manner, with solar energy having priority over any other source.

WES 660 A-C

Weishaupt Aqua Sol: WASol 310 - 510

A bivalent cylinder for solar DHW heating. Bivalent means that there are two heating coils within the cylinder; the lower coil is connected to the solar circuit, the upper to the heating system. If the energy provided by the solar circuit is not sufficient for heating the water in the cylinder, the heating system is switched on automatically. Three large gradations allow precise dimensioning for optimal heating convenience with minimal energy consumption.

WASol 310 410

Weishaupt Aqua Bloc: WAB 155

The Weishaupt Aqua Bloc forms a space-saving unit with the oil-fired WTC-OB condensing boiler. Top-side hydraulic and sanitary connections save space and simplify installation.

WAB 155

error while rendering weishaupt.teasers